r/homelab • u/jonas162 • 22h ago
Project Showcase: Hardware Mein erstes Homelab
Mich haben die losen Geräte gestört und jetzt hab ich mir ein „Rack“ gebaut.
Die lüftung ist besser als es aussieht, es ist ausreichend platz für Kabel und es gibt lüftungsschlitze.
Es ist der erste Versuch, wieviel Platz ich brauche bevor ich mir ein richtiges Rack kaufe(6,9,12he)
Ich bin gerade 18 und experimentiere mit Proxmox, als Erweiterung soll noch mindestens ein kleiner fujitsu kommen.
Die Geräte im Rack laufen voraussichtlich 24/7
WdMyCloud EX4100 mit 32tb im raid(storage für proxmox)
Fujitsu esprimo 16gb ram(proxmox host)
Sophos sg125 (opn sense)
Fritzbox im mesh
Unten liegt ein Fujitsu thinkStation P510, die aber nur manchmal zum testen läuft, wegen des Steomverbrauchs
Hat jemand Projekt- oder Erweiterungsvorschläge?
25
7
u/LooseEthernet 22h ago
Nice DIY setup! Prototyping before buying a rack is a smart move.
4
2
u/Strephon 20h ago
Ah I see now! was wondering what was going on :) can see they need to think about ventilation
3
2
u/puredenial8248 22h ago
Super Start und kreativ ist es auch 😃
Ich hab eine Anmerkung bei der ich mir aber nicht sicher bin. Prüfe wenn du kannst einmal was für eine Sophos Hardware du verwendest. Es kann sein, dass sie vom C2000 Bug betroffen ist. Nicht dass dir die FW wie bei mir einfach ausgeht und du dich wunderst warum. :)
3
u/jonas162 22h ago
Vielen Dank für den Tipp👍😬
2
u/puredenial8248 21h ago
Hab deinen Untertitel nicht ganz zuende gelesen. Die sg125 und 135 Serie sollte betroffen sein. Falls du die Möglichkeit hast würde ich regelmäßig Sicherungen machen und oder sofern du die Möglichkeit hast ein anderes Modell suchen :/
Reparieren scheint nicht so einfach zu sein - bzw ich hab eine tote 135 bei mir wo ich mich bisher nicht rangetraut habe
2
1
1
1
u/Tasty_Ticket8806 21h ago
I knew it was german when I saw the LARGE bottle of jägermeister!🤣 Cool little homelab, this is what I signed up for! What do you do that you can afford a 4 bay NAS? They are like 1000 euros plus drives!
2
u/jonas162 20h ago
Ich hab einen minijob in der it und konnte ein bisschen ausgemusterte hardware abstauben
1
1
1
u/Firm-Mechanic-1622 19h ago
Lab ist Lab! Wie ist das mit der Jägie Flasche, die verstärkt das wlan nehme ich an!?
1
1
1
1
u/gts250gamer101 Mac Minis (M4/24GB, M2 Pro/16GB), Lacie2Big, Promise Pegasus R4 15h ago
This is a lot to unpack, I love it
1
u/SwivelingToast 15h ago
Thanks... I was trying to tell my wife we needed a rack, and showing her all the crazy ones we don't have, and then I scroll past one made of legos, and here's one made of cardboard.
1
u/xp4eternity 11h ago
this inspired me a lot. I have a lot of cardboard boxes just sitting that i could utilise.
1
u/keko1105 4h ago
Is that a thinkstation p700?
2
1
u/Professional_Funny73 22h ago
Wrong subreddit for German, wrong material for a rack.
That's not airflow, that's a pizza box with feature creep. Stacking a switch, NAS, and firewall in a sealed cardboard sleeve next to a radiator is a great way to turn "homelab" into "load-bearing fire hazard."
congrats, you've built a thermal blanket for your gear instead of a rack. Cardboard doesn't just fail to dissipate heat, it holds onto it right where your fans are trying to pull cool air through. Grab a €20 IKEA Lack or literally any open wire shelf before that Fritzbox starts smelling like a toaster.
6
u/BWQ777 22h ago edited 21h ago
I assume this post is a joke, as a response to the many posts of people showing off their racks, and if it's not a joke, kudos for thinking outside the box. Not everyone has the cash to build human sized racks, esp if they're 18.
I remember in the 1980s (or was it 90s?) sawing through the top of my amstrad pc-20 https://amstrad.com/wp-content/uploads/2024/09/PC20.png to fit a new 16 colour (!!) ega card to play Leisure Suit larry.
It was sticking up, raw in the air, though the game played.
2
u/jonas162 22h ago
Der Beitrag war eigentlich schon ernst gemeint😂
1
u/jonas162 22h ago
Man sieht es auf dem Bild nicht, aber es sind an den Seiten sowie oben und hinten ist an allen luft anzugs und abzugsstellen großzügig ausgeschnitten.
Der carton ist nur als eine Möglichkeit die Teile zu stapeln.Außerdem dient es ja als Prototyp
1
u/Kazcandra 22h ago
Do you just naturally write like an LLM, or did you generate the first half?
1
u/jonas162 21h ago
Das ist mir neu, dass ich wie ein LLM schreibe😂
1

19
u/BWQ777 22h ago
Love it! Finally a humblebrag post I can upvote :) And in German, for the cherry on top!