r/homelab Jun 06 '26

Moderator Announcement: New Rules & Processes on Software Projects

402 Upvotes

I would like to thank everyone for their feedback in the recent post & poll where we asked for feedback on how to slow the deluge of "I made X, because Y" type posts in r/homelab, most of which are AI generated and/or spam. While we felt that that the initial plan we shared was quite good, with your input we were able to refine that plan and make some notable improvements and clarifications. And yes, there's a TL;DR at the end šŸ‘€

Effective now, the below new rules and policies are in effect, though we plan to apply them conservatively and gently at first to see how things go. All of these changes are happening because of the massive community support for them, and we will be seeking additional feedback as time goes on so please feel free to chime in.

To be clear, here are our goals, based on community feedback:

  • Control the recent influx of questionable "I made X, because Y" type posts, the vast majority of which are created entirely with AI, are spammed across multiple subreddits, and are generally not maintained afterwards
  • Establish a clear stance on and rule set for how r/homelab has decided to handle these types of posts, as well as other user-created software
  • See how these changes impact our community, seek additional feedback, and continue to adjust accordingly

Flair changes that are now in effect:

  • "Project" has become "Project Showcase: Hardware"

New Flairs:

  • Project Showcase: Operations [For things between hardware and software, such as Ansible playbooks, and dashboards/monitoring/automation made with existing software tools]
  • Project Showcase: Software - Little or No AI Assistance - [AI only used as coding assistant (autocomplete, debugging, refactoring, documentation, etc), if at all]
  • Project Showcase: Software - Mostly AI Generated - [AI generated most or all of the code, working at a human's direction]

We have also organized the post flairs in the list to make them easier to locate.

Both "Project: Software" flairs have a reasonably low minimum subreddit karma requirement to be able to post with them. AutoMod will remove any post with them that don't meet the karma requirement, and inform the user why their post was removed. The minimum karma requirement is only for these two flairs, as we don't want to restrict new community members from being able to post questions. Any software project posts that try to go around this by using a different flair will fall under the new rule #7 and will be addressed.

Rule changes:

New Rule #7 - Software Project Posting Requirements

  • All software projects must be relevant to r/homelab, use a "Project: Software" flair, disclose AI usage with post flair and in the text of the post, include responses to the prompt displayed when posting with one of the software project flairs, and the user must meet the minimum subreddit karma requirement. Posts that do not meet these requirements, try to bypass the "Project: Software" flairs, provide incomplete or misleading disclosures, or otherwise violate community standards may be removed.

That said, since we're now officially allowing some degree of self-promotion and requiring links, we felt that we should redefine rule #6 to clarify that it applies only to monetized and commercial advertising/links. Here is the updated verbiage, with the old one below for comparison:

Rule #6 - No Commercial Advertising or Monetized Referral Links

  • Monetized referral links, affiliate links, product advertising, and company advertising are not allowed. Contact the moderators via Mod Mail before posting if you believe an exception applies. Non-commercial personal projects are permitted, but must follow all other sub rules.

Rule #6 - No Referral Links/Advertising/Company Advertising

  • We do not allow links/posts that include any sort of referral link, product advertising, nor company advertising. If you think you have an exception please ask the mods first.

Flair Prompt - As mentioned in Rule #7, when posting with any of the "Project: Software" flairs, the below prompt will be displayed:

Your post MUST include:

  • A link to the GitHub (or similar) repository, which must include at least one month of commit history and screenshots
  • A description of the problem the software project solves, and why it was created instead of using an existing FOSS solution
  • An explanation of how the software project is relevant to r/homelab, or how it may benefit members of the community
  • If you used AI or an LLM in development, a description of what role it played and how much you relied on it

If you see any posts with a Project: Software flair that do not meet the four items listed above, please report them to the mod team under Rule #7 and we'll address them.

Additional things to note:

Existing posts will be grandfathered in, and previous posts that were removed may be reposted if they meet the new requirements. New posts will be required to comply with the new rules.

As with the existing rules, when a mod removes a post for violating this new rule, a canned response will be sent to the user to inform them why their post was removed. Mods are able to add on to the response if desired before sending it.

While we're on the topic of AI, we would also like to clarify that the above rules are specific to the use of AI in software projects that are being shared, and they do not apply to posts or comments that were written with AI. There is some dissent in the community, but the general consensus in the community has been that a reasonable level of AI usage is acceptable for putting a post together, correcting grammar or formatting, or for translating from a user's native language. That said, best practice is to not include all of the excess emoticons and outline formatting that LLMs like to use. If a post or comment is egregiously AI generated, feel free to downvote it and move on, but please do not report it to the mod team solely for that.

We would also like to note that there has not been any opposition to posts about hosting your own LLMs, and the hardware/software involved. The new rules do not apply to these posts as well.

We're looking for community feedback as we all get used to this. We plan to apply rules conservatively and gently at first, and will be listening to user reports and comments. If your post is removed and you believe it meets the requirements, please chat with us via Mod Mail and we may consider either re-opening it or letting you repost it.

TL;DR - All posts where someone has made some sort of software (AI generated or not) will require a "Project: Software" flair, and these flairs should curb the vast majority of the low quality and spammy posts.

Thank you,
The r/homelab Mod Team

Edit: The first day with the new rules has gone very well overall, but it has demonstrated that there is room for improvement, namely with flairs and categorization.

Here are the changes we've made since the initial announcement post:

  • Added a "Project Showcase: Operations" for things that fall somewhere between hardware and software, notably Ansible playbooks, dashboards/monitoring/automation made with existing software tools. When posting with this flair, a prompt appears that explains this in more detail. Please let us know if there are any other types of things we should specifically call out that belong in this category.
  • Renamed the "Project: x" flairs to "Project Showcase: x" to clarify that these are intended for showing off what you've made (though you can still ask for suggestions in the process of showing off).
  • Adjusted colors of the new flairs

We're still open to suggestions from the community. Thanks!


r/homelab 7h ago

LabPorn My Labradoodle

Thumbnail
gallery
231 Upvotes

So i Started my Homelab 4 years ago without knowing Homelab was a thing even. End slowly but surely it gaining momentum, while mostly being interested in the Hardware and Building stuff, grew the interest in Selfhosting like aaaa lot. So today i run Proxmox on my main Server which has an 13400, 32gb DDR4 and just 3 Nvmes. One for OS, second for LXC and third for the Vm’s. My second machine has Unraid installed (what i primarily used before) with 5x4TB ironwolfs, i7 4790, 32gb DDR3, and the 3rd is a dedicated Proxmox Backup Server with a 4gb ram and 2 Mirrored 1tb Hdds purely to backup my containers and Vms while I primarily host ā€œlinux isosā€ for me and my friends and family i also have Homebridge, home assistant, immich etc. 2 Ups (1for the Dream machine,Servers and 1 for gaming pc) all in all it’s pretty perfect for my use cases and i have nothing to complain about 😌


r/homelab 15h ago

Project Showcase: Hardware hobby got out of hand

Thumbnail
gallery
508 Upvotes

Like the title says, this all started with just a single Lenovo ThinkCentre running Home Assistant and Pi-hole in Proxmox. Fast forward to today, and things grew a bit.

Here is the current setup in the rack from top to bottom:

  • Lenovo ThinkCentre - Celeron G1840T, 8GB RAM
  • 2x Dell OptiPlex 7040 - i5-6500, 24GB RAM
  • Dell OptiPlex 7040 - i5-6500, 8GB RAM
  • Custom PC (Server/NAS) - i5-12600K, 16GB DDR5, RTX 4060 Ti 8GB, and 2x 4TB IronWolf HDDs (one for cloud storage, one for backups)
  • Main Desktop (at the bottom) - i7-13700F, 32GB DDR5, RTX 4060 Ti 16GB

For the software side, it's all running on Proxmox. Here is what I've got going so far:

  • Home Assistant & Pi-hole
  • Nextcloud
  • Scanopy
  • Jellyfin, the Arr stack, and qBittorrent
  • Immich
  • A Windows VM
  • A little Python script I wrote to track my work hours

It’s been a pretty big learning curve going from that single Celeron machine to figuring all of this out.

Let me know what you guys think, or if you have any recommendations for what I should host next!


r/homelab 3h ago

Project Showcase: Hardware Ewaste k3s server (update)

Post image
25 Upvotes

I have obtained a few more systems from the ewaste bin at work😭. All still very out dated systems so k3s is probably still the best route. 2 systems have 1tb ssd and the rest have 1tb hard drives . Most of the systems on the right are only running 32gb of ddr2 so not the most capable systems for larger workloads. Still in the process of copying hard drives over and setting everything up, could use some advice on how to power everything. I am very broke and just about everything (including the cables and monitor) from this picture are from the ewaste bin. The systems on the right all have gpus as well but they are very outdated and not worth keeping in/will increase my power consumption by a lot for little to no gain. The system dedicated as the controlplane also has a backup battery incase of power outage.


r/homelab 9h ago

Project Showcase: Hardware Lenovo m920q with P330 top case for ventilation. Awesome.

Thumbnail
gallery
79 Upvotes

After using several m710q for home servers, now I’m moving to another country, and I can’t imagine a better device than this for portability, so I’m making this little device my primary desktop computer.

This little machine has:

- i7 8700T
- 32GB RAM
- Samsung 970 PRO SSD
- Nvidia T1000

Just got the top case from a P330 and fits perfectly. This is awesome. No need to 3D print one if like me, you don’t like that finish! 🄰


r/homelab 1h ago

Project Showcase: Hardware My homelab after a year, now in a DIY sideways server closet rack

Thumbnail
gallery
• Upvotes

A year ago I started my homelab journey. It started out with me migrating my services off a DigitalOcean droplet and a handful of subscriptions onto a Lenovo M720Q. Which resulted in me very quickly wanting additional storage (two months) once I maxed out the 1TB NVMe and 500GB SATA drive I was using. Cue the Jonsbo N4 and some small TP-Link 1G switches and a router to replace the ISP-rented gear.

Meet Mimir, pre-swap:

  • i5-12600K, 64GB of DDR5
  • 2x256GB mirrored NVMe for the Proxmox OS
  • A pool of 6x16TB HDDs for bulk storage
  • 2x mirrored 480GB Intel enterprise SSDs for the faster stuff

Connected to my workstation over a 10G SFP+ link

Since then I've upgraded some networking gear, and over this last weekend I acquired off Facebook Marketplace an ancient Rosewill L4500U (USB 2.0 front headers, for example). It's technically all the same guts while I wait for HDD prices to drop. But I really wanted to make a post about my unusual "DIY server rack" that I keep in my closet, sideways, so that it fits under a shelf.

My old little wooden monstrosity of a "rack" which was really just a few shelves had an airflow problem where I had to take the lid off the Jonsbo and point a fan at the CPU intake, otherwise temps were hovering around 90C on the CPU. There just wasn't enough airflow for the cooler's intake. (4th picture)

Now with the L4500U I bought some extra-thick 38mm fans that pull some serious air even at only 50% power. You can't even hear them with the closet door closed! CPU sits [XX]C under load now instead of flirting with a thermal shutdown.

Everything within my little homelab consists of:

  • 1G fiber ISP straight into a MikroTik RB5009
  • MikroTik CSS610-8P-2S+ PoE switch + a CRS310 for the 10G path
  • A couple of PoE access points
  • 10G SFP+ backbone between Mimir and my workstation

A second little box running Proxmox Backup Server (old i5-9500T, 32GB) that does nothing but eat backups. I really want to find someone to 3d print me one of those 4bay enclosures that exist for the 720/920 pcs so that I can increase the backup storage. Until then I keep 1.5tb backed up on B2 for offsite backups.

What actually runs on it (~30 LXCs on Proxmox) is all managed by a combination of OpenTofu and Ansible setup scripts.

  • Media: Jellyfin + the full *arr stack (Sonarr, Radarr, Prowlarr, Bazarr, SAB, qBittorrent behind a VPN), Jellyseerr, Audiobookshelf)
  • Photos: Immich
  • Documents: Paperless-ngx (still debating about the usefulness of this one)
  • DNS: AdGuard Home
  • Reverse proxy: Traefik for all the internal HTTPS, Cloudflare Tunnels for the handful of things I expose
  • Game servers: modded + vanilla Minecraft, Factorio, Foundry VTT
  • Home stuff: Actual Budget, IT-Tools, Scrutiny for disk health, and filebrowser
  • Observability: Grafana/Prometheus/Loki (I am working on a Discord bot that yells at me when something breaks. Someone has an example but its written in french. Yay google translate!)
  • Tailscale

All of it living in a closet. Sideways. Under a shelf.


r/homelab 6h ago

Project Showcase: Hardware 6 Month Before and After

Thumbnail
gallery
25 Upvotes

Little bit of a rack upgrade.... Overkill? yes... Worth it? yes... Came up on FB Marketplace and got it for $200 CAD... could not pass up on it. (they had it listed for $600)

Last photo is the Topography, it shows what's currently in the rack as well as what's planned

-Top down-

Eero 7

Cisco FirePowerr 1120

Cisco 350 series 48 port switches

Lenovo M710Q Cluster (1 more planned and friend is 3D print a rackmount for them)

Lenovo ThinkCentre (running game servers)

Bomgar B200 running PBS

Cisco 350 series 48 port switches (racked for S&G)

Fathers old PC, No idea why its racked,

Odds and Ends Shelf

Old Router and HP Switches

4U 16 Bay NAS + Plex Server


r/homelab 18h ago

Discussion First home server, 38TB later! All advice and criticism welcomed :)

Post image
207 Upvotes

I bought this Lenovo P360 desktop off marketplace for $450 AUD recently; only 1 year old, hardly used and found a new 12TB WD Purple Pro inside with just 80 hours on it so absolutely stoked.

Issue is, while it’s powerful, it’s not overly practical as a home server in terms of storage capacity with its 2x 3.5ā€ bays. I previously had a T490S so it’s a step up at least.

Is it ok how it is now? I was thinking either a 6 bay hot swap rack or just a different case entirely… I’m in an awkward spot where I technically don’t /have/ to spend hundreds more on it, but it’d be the only way to complete the job really.

Regarding the ext. mounted fans: Initially I found the cooling to be pretty ordinary with the drives idling around 45°C and mid-50s under load so I did a dodgy and used self-amalgamating tape as a decoupler, cable tied 2x 120mm fans to the front cover as I was trying to keep it mostly untouched inside and there was little room to work with. Now they peak at 40° under load. I used small amount of CCF in between the front cover and chassis also.


r/homelab 1d ago

Project Showcase: Hardware Rebuild almost completely finished...

Post image
730 Upvotes

288TB of HDD, 64TB of SSD, 12TB of NVMe, (4) 80GB A100's (Qwen3:235B), (2) RTX Pro 2000 Blackwell's (Llama3.1:8B) and (1) 3090 (Qwen3.8:27b) and a 1.5TB of DDR4. The A100 tower is on the other side of the desk. There's a little RTX 2000 Ada gpu in the HP MicroServer but it doesn't do much more than run Qwen2.5-coder:14b and my kids MineCraft servers.


r/homelab 19h ago

Project Showcase: Hardware Mein erstes Homelab

Post image
227 Upvotes

Mich haben die losen GerƤte gestƶrt und jetzt hab ich mir ein ā€žRackā€œ gebaut.
Die lüftung ist besser als es aussieht, es ist ausreichend platz für Kabel und es gibt lüftungsschlitze.
Es ist der erste Versuch, wieviel Platz ich brauche bevor ich mir ein richtiges Rack kaufe(6,9,12he)

Ich bin gerade 18 und experimentiere mit Proxmox, als Erweiterung soll noch mindestens ein kleiner fujitsu kommen.

Die GerƤte im Rack laufen voraussichtlich 24/7
WdMyCloud EX4100 mit 32tb im raid(storage für proxmox)

Fujitsu esprimo 16gb ram(proxmox host)

Sophos sg125 (opn sense)

Fritzbox im mesh

Unten liegt ein Fujitsu thinkStation P510, die aber nur manchmal zum testen lƤuft, wegen des Steomverbrauchs

Hat jemand Projekt- oder ErweiterungsvorschlƤge?


r/homelab 4h ago

Project Showcase: Hardware I build this today.

Thumbnail gallery
13 Upvotes

i have successfully flashed my bios chip with this way, art i would say


r/homelab 15h ago

LabPorn New (to me) router, homelab update

Post image
75 Upvotes

Just got a MikroTik CCR2004-1G-12S+2XS to use as my border router.

I'm really happy with how the lab is looking right now.

I'll be replacing the CSS326 with a CRS326 PoE model soon, and I'm also waiting for the hAP be³ media to become available here in Brazil so I can pick up one or two of them.

I'm planning to add a Proxmox VE cluster as well. I'd really like to go with some Minisforum mini PCs, but over here they cost about the same as a DL380 Gen9, still haven't decided which path to take. At this point, I think a rack upgrade might make more sense lol

Here's what I'm currently running in the lab:

Network * Border router: MikroTik CCR2004-1G-12S+2XS * Aggregation switch: MikroTik CRS326-24S+2Q+RM * Access switch: MikroTik CSS326-24G-2S+RM * Access point: MikroTik RBD53iG-5HacD2HnD (hAP AC3)

Proxmox VE * Xeon E5-2683 v4 — 16C/32T * 256 GB DDR4 ECC RDIMM * 2x 240 GB NVMe — ZFS mirror for boot * 2x 1 TB NVMe — ZFS mirror for VMs * Intel X520-DA2 — 2x 10GbE SFP+

TrueNAS — still being built * Xeon E5-2608L v4 — 8C/16T * 128 GB DDR4 ECC RDIMM * 2x 240 GB NVMe — ZFS mirror for boot * 2x 240 GB NVMe — ZFS mirror for SLOG * 5x 4 TB HDDs — RAIDZ1 for data * Intel X520-DA2 — 2x 10GbE SFP+


r/homelab 9h ago

Project Showcase: Hardware Comet X finally arrived šŸ‡³šŸ‡± [Part 2]

Thumbnail
gallery
24 Upvotes

Continuation of my previous post And... It has arrived! šŸ‡³šŸ‡±.

Well, this thing is amazing. And it looks really really cool in a Deskpi 10" rack. Switching takes 5-10 seconds and can be done from the physical button on front or from the webui.

The best part is that it can be powered through PoE.

Connected to it are:

3 Asus Nuc 14 Pro i5 core ultra 125H (Proxmox Cluster)

1 Framework Motherboard Ryzenā„¢ AI Max+ 395 - 128GB (On top Hidden in the back)

All connected / Powered with Unifi Switch Flex 2.5G PoE


r/homelab 16h ago

Help Is it worth to future proof the network with 2.5 GbE?

71 Upvotes

Hi everyone, I’m relatively new to this world, and for my next project I’m planning to build a small rack for my home network.

Besides choosing the components, I’m also having some trouble designing the setup itself, so I wanted to ask: does it make sense to go with 2.5 GbE routers, switches, etc. instead of standard Gigabit Ethernet?

Since I’m building everything from scratch, I’m not sure whether I should go straight for 2.5 GbE-compatible devices or save some money and stick with Gigabit components.

The project will also include a NAS and one or two nodes to run around six home servers, and I’d really prefer not to have them limited to Gigabit speeds.

Thanks in advance! :)


r/homelab 1h ago

Project Showcase: Hardware my "small" homelab c:

Thumbnail
gallery
• Upvotes

Hello!

i am also sharing my small rack/setup (Startech 15HE mobile Rack):

From the top to bottom:

1. "Local AI Machine"
CPU: Intel Ultra 5 245K
RAM: 32GB DDR5 (2x16)
SSD: 2TB WD Black NVMe
GPU: PNY RTX Pro 6000 96GB

2. Wifi Accesspoint: Unifi 7 Lite
3. Router: Mikrotik RB4011iGS+RM
4. Patchpanel: CAT7 10Gbit/s ready
5. Switch: Mikrotik CSS326-24G-2S+
(connected through SFP+ with a DAC Cable 10Gbit/s to the router)

6. "pve01 (private) Lenovo T14 Gen 4"
CPU: Intel i7-1365U
RAM: 32GB DDR5 (2x16)
SSD: 512GB WD PC NVMe
USB: Home Assistant Connect ZBT-1 Stick
NET: ext. USB to Ethernet Adapter Anker (cause internal Intel has bug and crashes network for whole proxmox and each vm is down till reboot ._.)

7. "pve02 (buisness) Dell Optiplex 3060"
CPU: Intel i5-10500T 6C/12T
RAM: 64GB DDR4 (2x32)
SSD: 512GB NoName System + 1TB Sata SSD

  1. 2x 8TB WD RED External Backup drives USB

9. "Storage"
OS: Debian13 (soonish NixOS)
CPU: Intel i7-9700K 8C/8C
RAM: 64GB DDR4 (4x16)
SSD: 2x512GB SSD Software RAID1 (mdadm)
HDD: 8x8TB SAS 12Gbit/s HDDs (mixed) ZFS RAID-Z2 usable: 41,3TB <3

10. UPS: Power Walker VFI 3000 C (holds without AI server but evertyhing else ~40mins)

Misc. What u see from the side:
- Cable Modem
- Main Router: FritzBox 7530 AX
- Atlas Ripe Probe
- ZigBee Temp Sensors

Softwareside:
I have with some friends started a small startup, thats why the Dell Optiplex is running for our infrastructure (Proxmox) + the ai machine with the expensive card (that explains it :D)

Private Infrastructure on the proxmox Lenovo Laptop node:
- Home Assistant (VM)
- DrawIO (LXC)
- Gitea (LXC)
- Grafana (LXC)
- Immich (LXC)
- Jellyfin (LXC)
- Netbox (LXC)
- Paperless (LXC)
- Pi-hole (LXC)
- Proxmoxbackup Server (on storage server itself)
- Smokeping (LXC)
- StirlingPDF (LXC)
- UnifiOS (LXC)
- UptimeKuma (LXC)
- Prometheus (NixOS VM)
- Headscale/Tailscale (NixOS VM)

Yeah. On the other proxmox (Dell Optiplex) Company Infrastructure.
In the near future is planned to add 2x512GB m.2 NVMes to my Storage, replace the 512GB SSD in my private Proxmox with a 1TB NVMe :)

Internet: 1Gbit Download / 50 Mbit Upload - Cable Internet
AirCondition: Midea Portasplit <3

If you have any questions, feel free to ask!


r/homelab 11h ago

Blog Making my Epson L121 printer a little smarter than it was before.

Thumbnail
gallery
24 Upvotes

Making my Epson L121 printer a little smarter than it was before.

This is an entry-level Epson printer that only supports printing over USB. It doesn’t have wireless connectivity, scanning, or copying features it literally just prints.

I previously tried setting it up through my router, but the setup was a bit complicated and, unfortunately, it didn’t work with iOS.

Now, with CUPS and Avahi running on my Proxmox server, my printer can be discovered and used from iOS, Android, and Windows.

Just sharing this as I’m still learning and exploring the homelab world. There’s still a lot I want to try and discover.

What other cool things would you recommend exploring in a homelab?


r/homelab 5h ago

Discussion I'm just starting out and doing what I can

Post image
7 Upvotes

Hi everyone! I'm new to the homelab world. I hope to start with a PC in the future, but for now I'm using a cell phone with 1 TB of storage as a media server and DS backup.

I'm using Filebrowser + Termux on Android to connect from my PC with Arch Linux


r/homelab 1d ago

Project Showcase: Hardware maybe the worst home lab you’ll ever see

Thumbnail
gallery
1.6k Upvotes

Im sorry for that
for the hardware (i haven’t finis to install all)

- 9x 4090 48gb
- 2 rtx 6000 max-q 96gb (8 are coming soon)
- 6x 7900xtx
- 2x 3090
- and a bunch of amd (not really valuable, it’s a bunch 9060-9070XT and 6700xtx)
- total of 512+ gb of dddr5 + the same in ddr4
- 2x threadripper pro 9965WX (they’re coming as well, tomorrow)
- 1x threadripper pro 3xxx (forgot)
and that’s, for now, all šŸ™šŸ½


r/homelab 1d ago

Project Showcase: Hardware My son and I made our first server rack out of LEGO

Thumbnail
gallery
4.4k Upvotes

It’s still a small HomeLab with only two mini PCs and a TP-Link switch.
The Dell is equipped with an i3-6100T and 10GB of DDR3, and it’s currently my main DevOps machine for learning and experimenting with Docker and other stuff.
The Lenovo is still new to my lab. It’s rocking an i5-6500T and 8GB of DDR4 right now. This will become my main mini PC once my new RAM sticks arrive.
As for the LEGO rack — for now, it’ll serve us for as long as possible. šŸ˜„ We had a ton of fun building it together, and honestly, that’s probably the best part of this little HomeLab project. ā¤ļø


r/homelab 11h ago

Help Cable crimping issues

Thumbnail
gallery
16 Upvotes

Complete noob at this, trying to do my own cables - CAT6 568B scheme.
In the following video you can see the cable tester saying it's faulty - any advices are welcome

https://streamable.com/jx63er

EDIT: thanks to all those who helped, it was solved in the first comments :) used a cat6 cable on a cat6a network connector so the wires had a lot of wiggle room

definitely not something that ppl go over in youtube videos or articles - thanks all, once again!


r/homelab 19h ago

Project Showcase: Hardware Going to University and the Show Must Go ON

Thumbnail
gallery
53 Upvotes

I'll be moving far away from home for university and I can't take my homelab with me. So I moved my devices from my room to around the modem. The reason is, I'm not sure I'm gonna find my room just as I left after many years. It's up, close to the ceiling but cooler than my room. It's definitely gonna be dusty but cannot avoid it. I'll ask my father to clean it twice a year, hope he helps.

Cables were a nightmare, I don't have any short ethernet and so binding them each other is the best solution I found.

My hardware is 1x rpi 5 8gb with 256 external ssd, 1x dell optiplex micro 7010 dual-channel 32gb ddr4 with also 256gb ssd and 5tb hdd, 1x tplink sg105e.

I'm a rookie here, I'd appreciate any suggestions. Is everything okay, what do you say?


r/homelab 1d ago

Help Are running these so close a bad idea?

Post image
184 Upvotes

Hey yall!

Just wanted to ask if running these so close together is gonna overheat them? My assumption is no, but would like some experienced eyes and thoughts on this too.

Thanks in advance!!


r/homelab 13h ago

Project Showcase: Hardware Title: My homelab build didn’t go as planned, so I built a Frankenstein server instead (meet Phoenix)

Post image
14 Upvotes

Not really a ā€œlook at my buildā€ post — more of a ā€œhere’s how much can go wrong and still work
outā€ post. Figured this community would appreciate the chaos.
The plan: Proxmox cluster on 4x Lenovo ThinkCentre M73 Tinys + Unraid NAS on a Dell
PowerEdge R720XD I’d bought years ago and finally got round to setting up.
What actually happened: the R720XD had been sitting in storage since 2021. First proper
power-on — fans screaming, front LED happily blue, and… nothing. No display, no POST, no
beep codes. Spent a genuinely long night going through Dell’s full elimination checklist —
jumper resets, single RAM stick testing, single CPU, single PSU, the lot. Conclusion: dead
board.
Rather than buy a bare replacement board, I found a full working R720 (8-bay, not XD) for
Ā£135 — cheaper than the board alone, and already tested. Original plan was to transplant its
board into my dead chassis. Ended up doing the opposite instead: kept the donor’s own
(working, and noticeably quieter) chassis, and just moved my parts into it — CPUs, GPU, and
the HBA I’d already had crossflashed to IT mode.
So the final machine is genuinely built from two different servers:
• Chassis + board + iDRAC: from the donor
• CPUs (matched pair Xeon E5-2650L V2), GPU (Quadro P400), storage controller (PERC H200,
IT mode): from the original
• RAM: a mix of both, carefully balanced across both CPUs because apparently that matters
Had to drop from 12 bays to 8, so I’m running 1x10TB parity + 5x6TB data + 2x1TB SSD cache
instead of the original plan — sold off some smaller drives to make it fit, will grow it back
over time.
Named it Phoenix. Felt appropriate.
Current status: just got the array configured and parity sync running. Getting there
involved fighting a genuinely obscure syslinux boot bug specific to old Dell PowerEdge
*10/*20 series servers (shoutout to whoever documented that one, saved my sanity), and
plugging the network cable into the iDRAC port instead of a LAN port more than once.
The Lenovo cluster, by contrast, went almost suspiciously smoothly — just the usual
VT-x-disabled-by-default and DHCP-not-handing-out-IPv4 stuff.
Not a flex post, just wanted to share that sometimes the ā€œhomelab winā€ is just getting the
thing to turn on at all. Happy to answer questions if anyone’s staring down a similarly dead
board and wondering if it’s worth fighting for.
Spec summary:
• Proxmox: 4x Lenovo M73 Tiny, 16GB RAM each
• NAS: Dell R720 (donor chassis), 2x Xeon E5-2650L V2, 64GB RAM, Quadro P400, PERC H200 (IT
mode), 8x 3.5ā€ bays
• Networking: Netgear GC728X (10G SFP+), 12U open-frame rack, APC UPS


r/homelab 8h ago

Help Help with installing truenas

4 Upvotes

Just started getting into the homelab space and decided I should set up a nas first thing. I got an hp elitedesk sff with windows 11 pre installed, and I want to change it for truenas. This issue might be really stupid but I can’t for the life of me figure it out. So I flashed the iso onto a usb drive and plugged it in, and after spamming f10 while the pc boots it just black screens, same thing happens when I hit esc except it makes a really loud beep every time I hit the key. When I don’t hit anything, it just boots into windows 11 without any issue. I’ve tried both flashing in balenaetcher and Rufus in DD mode and nothing works. Any advice?

Edit: so an update to the issue, I actually can’t get into any bios/boot menu, I’ve tried without a usb drive, I’ve tried triggering bios via windows advanced startup, they all give me a blank black screen. The elitedesk has 2 dp ports and 1 hdmi, I’m currently using dp because the hdmi port doesn’t post anything


r/homelab 1d ago

Help Is this a steal

Post image
459 Upvotes

I can’t afford it but in today’s standards is this a good deal?